AMD Wraith Stealth Cooler Removal Guide
Introduction
If you're looking to upgrade your CPU cooler or clean your Wraith Stealth cooler, you'll need to know how to remove it properly. The Wraith Stealth is AMD's stock cooler that comes with many of their Ryzen CPUs. It's a simple cooler to remove, but there are a few things you need to know to do it safely.
Step-by-Step Instructions
- Power down your computer and unplug it from the power outlet. This is important for your safety.
- Open the side panel of your computer case. This will give you access to the motherboard and CPU.
- Locate the four screws that are holding the Wraith Stealth cooler in place. They are usually located around the edges of the cooler.
- Use a screwdriver to loosen the screws. Don't remove them completely, just loosen them until they are no longer tight.
- Carefully lift the Wraith Stealth cooler straight up and off of the CPU. Be careful not to bend or damage the cooler.
- Inspect the CPU and the cooler for any damage. If there is any damage, you should replace the cooler or the CPU.
- If you are installing a new cooler, follow the instructions that came with the cooler.
Troubleshooting
If you have any trouble removing the Wraith Stealth cooler, here are a few troubleshooting tips:
- Make sure that you have loosened the screws all the way. If the screws are still tight, you will not be able to remove the cooler.
- If the cooler is stuck, you can try gently rocking it back and forth. This may help to loosen it.
- If you are still having trouble removing the cooler, you can try using a spudger or a plastic pry tool. Be careful not to damage the cooler or the motherboard.
Komentar